Chiron Technology IRIS 8xx Series Guía de instalación descargar pdf (Pagina 9)

Iris Management Suite

Technical Guide V1.7C 4/11/07

4.3 Setting up the System via the Console

All system parameters and information about the diallers are held in a

database on the IRIS Console, so this has to be set up first. This is done

through the Console’s configuration windows and these are described in detail

below.

Part of this setup is to tell the Console the network addresses of the Polling

Engines, so that it knows where to send the database files.

Once the setup is complete, or has been changed, it should be downloaded to

all the Polling Engines and there is a button within the configuration windows

to do this.

The successful transfer of the database to the Poling Engines is reported on

the main windows of the Console and all the Polling Engines. It is

recommended that on the first download all windows are checked to ensure

that this transfer has happened properly. Subsequently it should only be

necessary to check on the Console itself.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 36 37

Sin comentarios

Chiron Technology IRIS 8xx Series Guía de instalación Pagina 9