Chiron Technology IRIS 8xx Series Guía de instalación descargar pdf (Pagina 27)

Iris Management Suite

Technical Guide V1.7C 4/11/07

The colour coding of the diallers as shown on the main Polling Engine window

are derived from the status and the poll state:

Colour Meaning

Green Polling OK (not overdue) and all communications

interfaces which are ticked in Monitor are OK.

Yellow Polling OK (not overdue) but at least one of the

communications interfaces which are ticked in Monitor is

not OK.

Brown Polling overdue but all communications interfaces which

are ticked in Monitor are OK.

For example, a situation that would cause this would be

where the dialler suddenly stops polling because it has

been physically disabled by all power being removed.

Red Polling overdue and at least one of the communications

interfaces which are ticked in Monitor is not OK.

This is the status that will be seen before the dialler polls

for the first time.

Alternatively, red will be seen if a dialler with a

communications interface problem (e.g. with GSM) goes

poll overdue.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 36 37

Sin comentarios

Chiron Technology IRIS 8xx Series Guía de instalación Pagina 27