Chiron Technology IRIS 8xx Series Guía de usuario descargar pdf (Pagina 26)

11 Local Configuration Console

11.1 Installation of the Local Configuration Console Software

The Chiron IRIS Dialler configuration software is provided on the CD that is

supplied with the unit. To install the software on a PC or Laptop use the following

procedure:

• Place the CD in the CD ROM drive of the PC or lap-top.

• Click the ‘Start’ button and select ‘Run…’.

• Click the ‘Browse’ button and open the CD ROM drive (normally D:).

• Double click on ‘Setup’ and then click on ‘OK’ to start installation.

• Follow the instructions on the screen.

11.2 Connecting to the Dialler

Connect the selected COM port on the PC or Laptop to the serial data port on the

Dialler using a standard modem cable.

11.3 Running the Console

The configuration software can be run from the ‘Start’ button by selecting:

Programs > CHIRON IRIS Configuration Console >> CHIRON IRIS Configuration

Console version x-x

Version 0.7 2/9/05

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Sin comentarios

Chiron Technology IRIS 8xx Series Guía de usuario Pagina 26