Chiron Technology IRIS 8xx Series Guía de usuario descargar pdf (Pagina 27)

12 Local Configuration with a Telephone Handset

Some of the configurations that may be required by the Dialler can be entered by

using a standard telephone connected to the ‘DIAL’ port in place of the alarm

dialler. Configurations are entered using ‘*’ commands, as follows:

12.1 Dialler Default

To set default configuration use: *9**1234567890#.

12.2 IP Address

By default the Dialler will automatically negotiate its IP address with the IP

network. If a fixed address is required (this address will be allocated by the IT

manger), the following commands are used to set the IP address and related IP

parameters:

• Own IP address: *65*0*nnnnnnnnnnnn# (12 digits)

• Sub-net mask: *65*1*nnnnnnnnnnnn# (12 digits)

• Default Gateway address: *65*2*nnnnnnnnnnnn# (12 digits)

To set back to automatic IP address, use *65*0*#.

Version 0.7 2/9/05

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

Sin comentarios

Chiron Technology IRIS 8xx Series Guía de usuario Pagina 27